AGI Security GV-CONCT - Manual (Page 68)

58
3.4.3.A Function Setting
In the left menu, click Function Setting. This AS400 Function Configuration page
appears.
Figure 3-20
[ID]
Enter the ID number for GV-AS400. This ID is used by GV-ASManager to differentiate
among multiple units of GV-AS400. ID number can only be between 1 and 255.
[Door/Gate #]
Select the function type and authentication mode for the use of Door/Gate A, B, C and D.
„ Function: Select the function for the reader connected to Door/Gate A.
 Door Control: The reader is installed in a general door for access control.
 Parking Control: The reader is installed in a parking place for access control.
 Elevator Control: The reader is installed in an elevator for access control.