AGI Security GV-CONCT - Manual (Page 36)

26
2.2.1 Connecting a Wiegand Reader
GV-AS110 provides one Wiegand input for connection to the Wiegand reader ranging from
26 to 64 bits. Through the GV-AS110 keypad, you can set the Wiegand reader as the entry
or exit reader. To define the reader, see the Door/Gate Function option in 2.3.2
Programming the GV-AS110.
The table below shows the wire assignments of the Wiegand input on GV-AS110. Please
consult the documentation of your Wiegand reader for wiring. You will need to set up a
separate power source to power the Wiegand reader.
2.2.2 Connecting Input Devices
GV-AS110 supports 3 types of inputs:
1. Sensor inputs, e.g. door status sensor
2. Button inputs, e.g. door opener
3. Fire Sensor inputs, e.g. fire detector
All inputs are dry contact
and can be configured as normally open (NO) or normally closed
(NC) through the GV-AS110 keypad. The default value is NO. To change the input status,
see the Select Input Contact Type option in 2.3.2 Programming the GV-AS110.
The table below shows the wire assignments of input connectors on GV-AS110.
Wire color Definition
Green Wiegand Data 0
White Wiegand Date 1
Wire color Definition
Yellow Door Sensor IN1
Orange Button IN2
Pink Fire Sensor IN3
Brown IN COM (GND)