AGI Security GV-CONCT - Manual (Page 139)

Optional Devices
129
4
4.2.5.B Advanced Settings
You can execute and edit door operations and settings, turn on Alarms, display card
information stored in GV-AS100/GV-AS110 and set the device time.
4.2.5.B.a Function Setting
In the left menu, click Function Setting. This AS100/AS110 Function Configuration page
appears.
Figure 4-41
[ID]
Enter the ID number for GV-AS100 or GV-AS110. This ID is used by GV-ASManager to
differentiate among multiple units of GV-AS100/GV-AS110. ID number can only be between
1 and 255.
[Door/Gate A]
Select the function type and authentication mode for the use of Door/Gate A.
„ Function: Select the function for GV-AS100/GV-AS110 on Door/Gate A.
 Door Entry Control: Sets GV-AS100/GV-AS110 as entry reader on the Door A.
The Weigand reader connected on GV-AS100/GV-AS110 will be set as exit reader.
 Door Exit Control: Sets GV-AS100/GV-AS110 as exit reader on the Door A. The
Weigand reader connected on GV-AS100/GV-AS110 will be set as entry reader.