AGI Security GV-CONCT - Manual (Page 26)

16
1.3.4 Setting Parameters
You can define the parameters of some features on GV-AS100.
IMPORTANT: Once connecting to GV-AS100, GV-ASManager will load its parameters to
GV-AS100. That means some of parameters you set up here may be overwritten by GV-
ASManager later.
1. Press the code ＊738 (＊SET).
2. Present the Master Card and enter its PIN code. The LCD displays Set Local Time.
3. Press 0 to change the options. Press # to select the option for further programming.
Option Function
Set Local Time Sets the time, time zone and enables daylight saving.
Set AS100 ID Sets the ID of GV-A100 from 1 to 255.
Set Auth. Mode Sets an authentication mode for the door/gate.
„ Auth. Schedule: Follows the authentication schedule set on
GV-ASManager.
„ Fixed Card Mode: Grants access after the card is presented.
Ignores the authentication schedule of GV-ASManager.
„ Fixed Card + PIN: Grants access after the user presents the
card and then enters the card’s PIN code. Ignores the
authentication schedule of GV-ASManager.
„ Fixed Card/Common: Grants access after the user presents
the card or enters the door’s password. Enter the door’s
password after the LCD displays Common Password.
Ignores
the authentication schedule of GV-ASManager.
„ Local Unlock Mode: Remains open. The held-open state
cannot be cleared through GV-ASManager.
„ Local Lock Mode: Remains locked. The locked state cannot
be cleared through GV-ASManager.