AGI Security GV-CONCT - Manual (Page 144)

134
[Alarm]
Select Yes or No to enable or disable the alarm function. The default settings for all the
alarms are set to NO.
Figure 4-44
• When Door Entry/Exit Control or Parking Entry/Exit Control is selected in the
Function Setting page (Figure 4-41), these options become available:
Option Description
Held Open This alarm activates whenever the door is held open over the set
period of time.
Forced Open This alarm activates whenever the door is opened by force.
Fire Alarm This alarm activates whenever fire is detected.
Access Denied This alarm activates whenever entry is denied due to using the
wrong card or entering the wrong password.
Tamper This alarm activates whenever vandalism occurs, e.g. the opening
of Controller’s cabinet.
• When Elevator Control is selected in the Function Setting page (Figure 4-41), these
options become available:
Option Description
Fire Alarm
Access Denied
Tamper
See the same option above.