AGI Security GV-CONCT - Manual (Page 38)

28
2.2.4 Connecting to the PC
The computer running GV-ASManager software can be used to monitor the access
information and alarm messages from GV-AS110. The communication link between the
computer and GV-AS110 can be either through RS-485 or network. For RS-485 connection,
a RS-485 to RS-232 converter is required. For network connection, an optional GV-ASBox
or GV-ASNet is required.
2.2.4.A RS-485 Connection
The figure below illustrates the RS-485 connection to the computer. For this connection, a
RS-485 to RS-232 converter between GV-AS110 and the computer is required. You can use
GV accessories, such as GV-Hub, GV-COM and GV-NET/IO Card, as the RS-485/RS-232
converter.
1 2 3
4 5 6
7 8 9
＊ 0 #
Figure 2-5
The table shows the wire assignments of RS-485 connection on GV-AS110.
Wire color Definition
Blue RS485 A+
Light Blue RS485 A-