AGI Security GV-CONCT - Manual (Page 127)

Optional Devices
117
4
Output Function Settings:
When Output Type (No. 1, Figure 4-33) is set to be Door #, Gate # or Relay #, the options
similar to the figure below become available.
Figure 4-34
Below is the explanation based on the numbers marked on the above figure.
1. ASBOX Output #: Edit the name of the Output.
2. Output Type: Configure the output type. Options available for the output type change
based on your settings of Door/Gate A and Door/Gate B in the Function Setting page
(Figure 4-23).
3. Output Function: Configure the output function. Options available for the output
function change based on your setting of Output Type above.
• When Door Entry/Exit Control is selected in the Function Setting page (Figure 4-23),
these Output Type and Output Function become available:
Output Type Output Function Description
Electric Lock Output is triggered when the card is
presented to open the locking device.
Alarm Event Output is triggered when the defined alarm
events occur.
Entry Card Output is triggered when the card is
presented to enter the door.
Door #
Exit Card Output is triggered when the card is
presented to exit the door.
1
2 3