AGI Security GV-CONCT - Manual (Page 119)

Optional Devices
109
4
[Alarm]
Select Yes or No to enable or disable the alarm function. If you have defined the alarm
conditions in [Output Function] of the In/Out Function page (Figure 4-31), remember to
activate the corresponding alarms here; otherwise, even though the alarm conditions are
met, the expected alarm will not be triggered. The default settings for all the alarms are set
to NO.
Figure 4-26
• When Door Entry/Exit Control or Parking Entry/Exit Control is selected in the
Function Setting
page (Figure 4-23), these options become available:
Option Description
Held Open This alarm activates whenever the door is held open over the set
period of time.
Forced Open This alarm activates whenever the door is opened by force.
Fire Alarm This alarm activates whenever fire is detected.
Access Denied This alarm activates whenever entry is denied due to using the
wrong card or entering the wrong password.
Tamper This alarm activates whenever vandalism occurs, e.g. the opening
of Controller’s cabinet.
• When Elevator Control is selected in the Function Setting page (Figure 4-23), these
options become available:
Option Description
Fire Alarm
Access Denied
Tamper
See the same option above.