AGI Security GV-CONCT - Manual (Page 121)

Optional Devices
111
4
4.1.5.E.c Status Monitor
In the left menu, click Status Monitor. This page appears.
Figure 4-28
[Status Monitor]
Status Monitor displays the current status of each input, output and alarm. Control Mode
will change depending on the chosen Door/Gate’s Authentication Mode in the Function
Setting page (Figure 4-23). The listed number of outputs will change depending on the
chosen Output Type in the In/Out Function page (Figure 4-31).
= Indicates the current input/output device is triggered.
= Indicates the current input/output source is not triggered.
= Indicates the current event is triggered.
= Indicates the current light is on.
= Indicates the current light is off.
Note: Outputs must be turned on in the In/Out Function page to be monitored here.