Paxton Superchargers Shelby Mustang GT User Manual

Page 54

P/N: 4809660
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
27FEB07 v1.0 05-07ShelbyMusGT(4809660v4.0)

Using the supplied 17.0 stepless clamps and 2.75"
length of Ø3/8" rubber hose, connect the supplied
“Y” fitting to the distribution rail. (See Fig. 11-e.)

Locate the supplied fuel pump and pump inlet
screen. Attach the pump inlet screen to the pump
and orient exactly as shown. (See Fig. 11-f.)

Secure the supplied fuel pump to the side of the
factory pump assembly using the #44 hose clamp
supplied. Verify that the hose clamp is routed
inside of the metal posts so that they can be
pushed down without restriction. (See Fig. 11-f.)

Slide the two supplied .75" long teflon sleeves
over the discharge of each fuel pump. (See
Fig. 11-g.)

Fig. 11-e

Fig. 11-f

Y-FITTING

PUMP INLET

SCREEN

#44 HOSE

CLAMP

NOTE:

The supplied 1.5" long Teflon tube will
need to be cut into two .75" long pieces.

11.

FUEL PUMP UPGRADE, cont’d