Paxton Superchargers Shelby Mustang GT - Manual (Page 18)

P/N: 4809660
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
27FEB07 v1.0 05-07ShelbyMusGT(4809660v4.0)
6
4. POWER STEERING RELOCATION
A. Locate the power steering assembly 4FU110-010.
B. Attach the power steering (P/S) relocation bracket
4FU010-010 with the hardware provided to the
P/S reservoir removed in an earlier section. (See
Fig.4-a.)
C. Attach the 3/4" P/S hose along with the 3/8" P/S
hose to the outlets of the reservoir with the clamps
provided. (See Fig. 4-b.)
D. Attach the 3/4" and the 3/8" hose barb unions to
the factory hoses using the factory clamps.
E. Attach the reservoir to the passenger’s side radia-
tor core support using one of the factory ground
strap retaining bolts. (See Fig. 4-c.)
F. Attach the hoses from the reservoir to the factory
P/S hoses and secure with the supplied clamps.
Trim for best fit. Secure the hose to the fan shroud
away from heat and moving objects.
G. It will be necessary to trim the corner of the radia-
tor core support cover to clear the relocated P/S
reservoir. (See Fig. 4-d..)
Fig. 4-a
Fig. 4-b
Fig. 4-c
Fig. 4-d
TRIMMED AREA