Paxton Superchargers Shelby Mustang GT - Manual (Page 19)

P/N: 4809660
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
27FEB07 v1.0 05-07ShelbyMusGT(4809660v4.0)
7
A. Locate assembly 4FU214-021.
B. Remove the hose connected to the back, lower
portion of the engine coolant crossover tube. (See
Fig. 5.1-a.)
C. Remove the nylon clip retaining the wire harness
to the alternator brace and the four 10mm headed
bolts securing the alternator brace. Set the brace
aside to be reinstalled. (See Fig. 5.1-b.)
D. Remove the factory coolant bleed plug and set the
plug aside. It will not be reused. (See Fig. 5.1-c.)
E. Remove the remaining two 10mm head bolts
securing the crossover tube to the cylinder heads.
5.1 COOLANT TUBE RELOCATION (2005-2006 Models Years Only)
Fig. 5.1-a
Fig. 5.1-b
Fig. 5.1-c
NYLON
ALIGNING CLIP
10mm HEADED BOLTS
HOSE CONNECTION
BLEED PLUG
NOTE: For 2007 Models skip to Section 5.2.