Paxton Superchargers Shelby Mustang GT - Manual (Page 39)

P/N: 4809660
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
27FEB07 v1.0 05-07ShelbyMusGT(4809660v4.0)
27
8. CHARGE AIR COOLER INSTALLATION
Fig. 8C-a
1. Locate assembly 8N155-080.
2. Attach the rear reservoir mounting bracket
4FU010-051 to the reservoir with the 1/4-20 x
1/2" long bolts and washers provided. (See
Fig. 8C-a.)
3. Attach bracket 4FU010-061 to the front of the
reservoir with the hardware provided. (See
Fig. 8C-b.)
4. Locate and install 1/4"NPT x 3/8" barbed fit-
ting in the tapped hole just above the previ-
ously installed mounting bracket. This hole
may have to be opened using the appropriate
drill bit. (See Fig. 8C-c.)
C. ENGINE COOLANT RESERVOIR
INSTALLATION (2005-2006 Models Only)
Fig. 8C-b
Fig. 8C-c
NOTE: For 2007 models skip to Section 8.F.