Paxton Superchargers Shelby Mustang GT - Manual (Page 33)

P/N: 4809660
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
27FEB07 v1.0 05-07ShelbyMusGT(4809660v4.0)
21
8. CHARGE AIR COOLER INSTALLATION cont’d
NOTE: When installing the cooler, make
sure that the water ports are config-
ured as shown in Figs. 8B-a, 8B-q.
The “top cooler port” must be the
highest point on the cooler for prop-
er air purging.
B. WATER COOLER ASSEMBLY
INSTALLATION, cont’d
7. Attach the previously assembled water cooler
to the bolts and spacers and secure with the
8mm nuts and washers provided. Tighten all
cooler hardware at this time. (See Fig. 8B-e.)
8. Attach the supplied short 90° hose (7U030-
065) to the top port on the CAC cooler as
shown. (See Fig. 8B-f.)
9. Install one of the supplied 3/4" hose unions
into the open end of the previously installed
90° hose and secure. (See Figs. 8B-f, 8B-q.)
Fig. 8B-e
Fig. 8B-f
3/4" HOSE UNION
SHORT 90° ELBOW