Air inlet assembly – Paxton Superchargers Shelby Mustang GT User Manual
Page 50
P/N: 4809660
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
27FEB07 v1.0 05-07ShelbyMusGT(4809660v4.0)
38
A.
Locate assembly 4FU112-010.
B.
Remove two of the 3/8-16 x 1" bolts securing the
supercharger in place. Install the air inlet support
bracket and secure with the 3/8" bolts removed
from the supercharger mounting plate. (See Fig.
10-a.)
C.
Install the 3/4"NPT x 1" x 90° plastic fitting to the
air inlet duct. (See Fig. 10-b.)
D.
Install the 1/4"NPT x 3/8" hose barb fitting in the
location noted. (See Fig. 10-c.)
E.
Attach the 4.0" x 3.5" reducer sleeve to the inlet
duct. Secure the sleeves with the clamps provided.
(See Fig. 10-d.)
Fig. 10-a
Fig. 10-d
Fig. 10-c
Fig. 10-b
3/4"NPT x 1" x 90°
BARBED FITTING
1/4"NPT x 3/8" x 90°
HOSE BARBED FITTING
10.
AIR INLET ASSEMBLY