Paxton Superchargers Shelby Mustang GT - Manual (Page 43)

P/N: 4809660
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
27FEB07 v1.0 05-07ShelbyMusGT(4809660v4.0)
31
Fig. 8E-a
Fig. 8E-b
Fig. 8E-c
8. CHARGE AIR COOLER INSTALLATION cont’d
E. ENGINE COOLANT RESERVOIR INSTAL-
LATION (2007 Models Only)
1. Locate assembly 8N155-082.
2. Attach the rear reservoir mounting bracket
4FU010-091 to the reservoir with the 1/4-20 x
1/2" long bolts and washers provided. (See
Fig. 8E-a.)
3. Attach bracket 4FU010-061 to the front of the
reservoir with the hardware provided. (See
Fig. 8E-b.)
4. Locate and install 1/4"NPT x 3/8" barbed fit-
ting in the tapped hole just above the previ-
ously installed mounting bracket. This hole
may have to be opened using the approppriate
drill bit. (See Fig. 8E-c.)
4FU010-091
RESEVOIR
BRACKET
8N055-080
OVERFLOW
TANK