Paxton Superchargers Shelby Mustang GT - Manual (Page 42)

P/N: 4809660
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
27FEB07 v1.0 05-07ShelbyMusGT(4809660v4.0)
30
Fig. 8D-a
Fig. 8D-b
DISCARD THIS
SECTION OF HOSE
Fig. 8D-c
8. CHARGE AIR COOLER INSTALLATION
D. RADIATOR HOSE MODIFICATIONS ('05-
'06 Models Only)
1. Remove the passenger’s side upper radiator
hose. (See Fig. 8D-a.)
2. Modify the upper hose by cutting the hose
just after the bend. (See Fig. 8D-b.)
3. Attach the hose to the formed stainless tube
4FU014-010 with a #24 hose clamp.
4. A section of 1-1/2"ID hose left from the
coolant tube relocation will be cut to approxi-
mately 2-3/4" long and attached to the outlet
of the radiator reusing the factory spring
clamp to secure the hose to the outlet.
5. Install the formed coolant tube to the inlet on
the engine and to the radiator. Secure with
hose clamps. (See Fig. 8D-c.)