Paxton Superchargers Shelby Mustang GT User Manual

Page 51

P/N: 4809660

27FEB07 v1.0 05-07ShelbyMusGT(4809660v4.0)

10.

AIR INLET ASSEMBLY, cont’d

Attach the 3/8" hose previously connected to the
passenger’s side valve cover, to the 1/4"NPT x
3/8" hose x 90° fitting installed in a previous step.

Attach the 1" bypass outlet hose to the 90° plastic
fitting and secure the hose with a #16 hose clamp.

Install the duct to the inlet of the supercharger and
secure in place with the clamps provided.

Locate and install a 4.0" x 2.0" long sleeve to the
inlet of duct 4FU012-010 and secure with two #64
clamps. (See Fig. 10-e.)

Remove the Factory MAF sensor element from
the top portion of the air filter housing.

Install the element using the 4mm hardware pro-
vided to the supplied MAF tube. (See Figs. 10-f,
10-g.)

Fig. 10-e

Fig. 10-f

Fig. 10-g

TO MAF

FACING

AIR FILTER