Paxton Superchargers Shelby Mustang GT - Manual (Page 41)

P/N: 4809660
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
27FEB07 v1.0 05-07ShelbyMusGT(4809660v4.0)
29
8. CHARGE AIR COOLER INSTALLATION cont’d
Fig. 8C-i
Fig. 8C-h
Fig. 8C-j
TRIM FAN SHROUD AS NEEDED
FOR HOSE CLEARANCE
9. Modify the small hose removed from the fac-
tory coolant overflow reservoir. By cutting the
"S” bend off the hose end. (See Fig. 8C-h.)
10. Install a 3/8" union and a #17 stepless clamp.
Secure the clamp. Using a length of 3/8"
(approximately 40" long) hose that is provid-
ed, secure the hose to the union with a #17
stepless clamp. (See Fig.
8C-i.)
11. Route the overflow hose across the radiator
and under the radiator retaining bracket to the
1/4"NPT x 3/8" hose barb fitting in the
coolant reservoir securing with a clamp. (See
Fig. 8C-j.)
C. ENGINE COOLANT RESERVOIR INSTAL-
LATION (2005-2006 Models Only), cont’d