D*ap4 – Junger Audio D*AP4 FLX / D*AP4 LM Edition User Manual
Page 79
D*AP4
74
Output voltage
0.6 Vpp (typ.) @ 75 Ohm
General Features
•
Input cable equalizer for extended range and robustness
•
Reference grade word clock recovery, master-sync capable
•
Dedicated routing for non-processed channels, all channels
(max. 64) can be routed to/from the device or looped through
•
AES3 channel status management, non-audio detection
Technical Data – Option Board MADI I/O, Optical [O_DAP_MO_MM_a, O_DAP_MO_SM_a]
Standards
Relevant specifications comply with AES10-2008 and AES11-2009.
Audio
24 bits, transparent forwarding of PCM and compressed audio
Audio Sample Rate
44.1, 48, 88.2, 96 kHz, (88.2, 96 kHz short framing)
64/56 channels @ 44.1 and 48 kHz, 32/28 @ 88.2 and 96 kHz
Processable by D*AP8: 16 channels @ 44.1, 48 kHz
Processable by D*AP4: 8 channels @ 44.1, 48, 88.2, 96 kHz
Connector type
LC (IEC 61754-20)
Center wavelength
1310 nm (typ.), 1270 … 1360 nm
Optical Input, LC
Input optical power
[O_DAP_MO_MM_a]:
-31 … -8 dBm, OM2 multimode (50/125 µm)
[O_DAP_MO_SM_a]:
-23 … -8 dBm, singlemode (9/125 µm)
(standard values, others on request)
Cable length (max.)
[O_DAP_MO_MM_a]: 1.5 km, OM2 multimode
[O_DAP_MO_SM_a]: 2 km, singlemode
(standard values, others on request)
64/56 channels @ 44.1 and 48 kHz, 32/28 @ 88.2 and 96 kHz
Processable by D*AP8: 16 channels @ 44.1, 48 kHz
Processable by D*AP4: 8 channels @ 44.1, 48, 88.2, 96 kHz
Connector type
LC (IEC 61754-20)
Center wavelength
1310 nm (typ.), 1270 … 1360 nm
Optical Output, LC
Output optical power
[O_DAP_MO_MM_a]:
-23 … -14 dBm, OM2 multimode (50/125 µm)
[O_DAP_MO_SM_a]:
-15 … -8 dBm, singlemode (9/125 µm)
(standard values, others on request)
Optical and BNC output carry the same signal.
Impedance
75 Ohm
BNC Output
Output voltage
0.6 Vpp (typ.) @ 75 Ohm
General Features
•
Field-replaceable optical module (SFP)
•
Reference grade word clock recovery, master-sync capable
•
Dedicated routing for non-processed channels, all channels
(max. 64) can be routed to/from the device or looped through
•
AES3 channel status management, non-audio detection
•
Parallel outputs (BNC/LC) for media conversion