Junger Audio D*AP4 FLX / D*AP4 LM Edition - Manual (Page 25)

D*AP4
20
Setup GUI – SYSTEM – Firmware Update
The files to update the D*AP4 will be available in ZIP format. You must unpack them to your PC in order to
use them for the update procedure. Here an example path name from the ZIP file:
junger_dap4_mei_firmware/base_unit_image
The folder /base_unit_image contains an image file for the D*AP4 core system in the format (example):
"rel_dap4-mei_3_0_2-25852.img". The other folders contain update files for components, like the optional
interface boards in the format: "rsdi150_v51.sdi" or for the X*AP RM
1 remote panel in the format:
xap_125105.img.
To update the D*AP4, you must to find the respective firmware file
(which you have unzipped before) and press . After finishing the procedure
the device will automatically reboot.
You may also update the firmware of an installed SDI board (Interface 1).
Finally you can see the options of your device which you have bought a license for. When you buy a
license you must provide the license info file and in return you will get a new license file which you
must apply to the device here.
Setup GUI – SYSTEM – Reboot
Restore Factory defaults Will clean up the parameter and preset memory and will initialize all
parameters to their factory default values and will reset passwords
and turn authentication off.
Overwrite Current IP You may exclude the current IP settings from this process
IP Configuration to keep your existing settings.