Junger Audio D*AP4 FLX / D*AP4 LM Edition - Manual (Page 39)

D*AP4
34
Set up GUI – INTERFACES – 4 Ch ANALOG I/O Interface
An additional analog interface can be installed in the Interface slot.
It provides 4 additional analog line inputs and outputs on a 25pin D-Sub connector:
Enable Relay Bypass
[ON / OFF]
(All Channels) Power fail bypass relay that may be activated from the GUI
Analog Input Calibration [0 … 15.0 … 24.0]
(dBu) (level for digital 0 dBFS) A/D conversion parameter. It defines the analog input level in dBu to
reach a digital full scale signal.
Analog Output Calibration [0 … 15.0 … 24]
(dBu) (level for digital 0 dBFS) D/A conversion parameter. It defines the analog output level in dBU
for a digital full scale signal.