D*ap4 – Junger Audio D*AP4 FLX / D*AP4 LM Edition User Manual
Page 67
D*AP4
62
Lets have a look at the "Soft GPI-1" trigger.
If you open the EmBER+ viewer tool you must drill down to network_trigger:
The path is also shown at the
bottom of the main window:
As a value you will receive the trigger name that
you have given to the first network trigger "Soft GPI-1".
The automation may now fire that trigger by simply
returning the string.
For demonstration how it works press
This works as sending a pulse (behaves like a push button).
But the automation may also give it a value of "1" to set the trigger and later on a "0" to reset it.
What best to do depends on the functionality you need for a specific application.
Setup GUI – EVENTS – Triggers – Sources – Parameters
Above is an example of how to setup parameter trigger sources.
The first one (Sync Alarm) becomes active if the selected Parameter "Sync Lock" becomes false.
The second one (SDI Alarm) becomes active if "SDI Lock" becomes false.