Junger Audio D*AP4 FLX / D*AP4 LM Edition - Manual (Page 15)

D*AP4
10
Operating - menu structure of the X*AP RM 1 remote panel
Power up display – may show up to four D*AP4's enabled for remote control for this X*AP RM 1
remote panel. The example below has just one D*AP4 unit [given name "LM4"] attached for
remote control. The status is "connect" (i.e. you may connect with that device).
See X*AP RM1 manual for details.
Pressing that button will connect with the D*AP4.
Now the X*AP RM
1 remote panel will gather all necessary information from that D*AP4 unit
(this may take a few seconds). When finished the main operating display opens up:
From here you may fire pre-defined hotkeys and observe the loudness of the processed programs.
Because this is the main operating display, the button lights
red to indicate that the
power up display is below the main operating display.
Pressing
sends you back to the power up display (device selection).
Operating – menu structure of the X*AP RM 1 remote panel – operating displays
When you press the
When pressing the button you will return to the main operating display.
Operating display – Audio Processor
returns to the operating display.
MENU
ESC
Hotkey 1 Hotkey 2 Hotkey 3 Hotkey 4 Hotkey 5 Hotkey 6 Hotkey 7 Hotkey 8
Program 1 Program 2
-21.0
LUFS
-21.5
LUFS
EBU
S
out
MENU
ESC
Remote Panel select device to control
LM4
10.110.96.13
connect
MENU
ESC
Menu LM4 10.110.96.13
Audio
Processor
EBU R 128
Meter
MENU
ESC
Audio Processor LM4 10.110.96.13
Fail
Over
Input Spectral
Signature
Dynamics Voice
Over
Level
Magic
Output Equalizer