Junger Audio D*AP4 FLX / D*AP4 LM Edition - Manual (Page 61)

D*AP4
56
Setup GUI – AUDIO PROCESSOR – Output
Link
[unlinked / linked]
defines the coupling of the
control circuits
Output [ON / OFF]]
Mute [ON / OFF]
Attenuation (dB) [-80.0 … 0.0]
Mono [L+R Mono / LL Mono /
RR Mono / Stereo]
Output Delay [0.0 … 2000.0]
Coarse (ms) [
Output Delay [0 … 2000]
Fine (samples) [
Setup GUI – AUDIO PROCESSOR – Delay
The D*AP4 has an independent audio delay that may be routed to any signal path inside the device.
Link
[unlinked / linked]
defines the coupling of the
control circuits
Delay [ON / OFF]
Output Delay [0.0 … 2000.0]
Coarse (ms) [
Output Delay [0 … 2000]
Fine (samples) [
Important Note! If the audio delay is routed into an internal signal path via the device routing matrix one
must add an initial delay of 27 samples.