Junger Audio D*AP4 FLX / D*AP4 LM Edition - Manual (Page 49)

D*AP4
44
Expert
[ON / OFF]
All parameters within the Expert section are duplicated in the Signature
and Spectrum graphs. They can be used to enter numerical values
directly. Changes are reflected in the graphs and likewise in reverse.
Link Max Gain [ON / OFF]
Settings
Link Threshold [ON / OFF]
Settings
Band 1 [ON / OFF]
Normalized [-40.0 … 0 … 40.0]
Signature level
Max Gain [0.0 … 3.0 … 12.0
Absolute Gate [-84.0 … -80.0 … 0.0]
Threshold
Band 2 … 16 similar parameters as Band 1
Setup GUI – AUDIO PROCESSOR – Filter – Equalizer
The graphical EQ offers 5 bands. The characteristic of each band can be setup either left hand side of
the graph or alternatively for each band further below.
Program [Program1 / Program2 / Preset]
Selects the source for which the curve will be displayed.
This selection depends on the Voice Channel Mode
(see SYSTEM > Setup) and whether or not the channels are linked for
stereo operation.
Channel [1L/1R, 2L/2R, 1L, 1R, 2L, 2R]]
Depending on the program selected and the link status (see below
graph) the channel under control will be displayed here.
Enable [On / OFF]