Drylam Fujipla ALM3222 - Manual (Page 7)

AL-MEISTER ALM3222 Instruction Manual
Page 7 of 63
INSTALLATION
To avoid fire, electric shock, or any danger, do not install the machine in a place like:
In direct sunshine or near an air
conditioner.
In an extremely cold area.
In an extremely dusty area.
In an extremely humid/dry area.
In/near a heating appliance or extremely hot
area.
On an uneven or shaky floor.
POWER SUPPLY/GROUND WIRE
1. Use the appropriate power supply. Always connect to AC120V. Unstable voltage may cause electric shock,
fire, or damage to the machine. Always avoid using multiple outlet connections.
2. Pay attention to the amperage. Unless the amperage is enough, it may cause fire or malfunction. A
dedicated circuit is highly recommended.
3. Ensure a ground connection is correctly made to avoid any danger or electrical problems. Do not alter the
power cord.
4. Handle power cord with care.
Do not set the machine on the power cord. Do not pull the power cord forcibly.
Do not place the machine near heated equipment.
Damage to the power cord may cause fire, electric shock or damage to the machine and the operator.