Drylam Fujipla ALM3222 - Manual (Page 42)

AL-MEISTER ALM3222 Instruction Manual
Page 42 of 63
Example of setting 100 sheets:
---- READY ----
TEMP: 210 SPEED: 40
MARGIN: YES F10
SET COUNT: 0/100
In the above example:
0: finished number/100: set value
NOTE: Lamination errors will not affect the count.
Example of setting FREE:
---- READY ----
TEMP: 210 SPEED: 40
MARGIN: YES F10
SET COUNT: FREE
When you select FREE all the papers on the feeder tray will be laminated.
NOTE: A “Feeding Error” will occur after the last sheet has been drawn from the Feed Tray in “FREE” or
if the SET COUNT is higher than the number of sheets on the tray. This is normal.