Installation, 1. installing the alm3222, 2. set feeder tray – Drylam Fujipla ALM3222 User Manual
Page 18: 3. set exit tray
AL-MEISTER ALM3222 Instruction Manual
Page 18 of 63
3. INSTALLATION
3-1. INSTALLING THE ALM3222
Allow an area about 18”' around the machine and trays for operation. *Read the safety instructions about the
installation carefully. Always contact the DryLam Tech-Line if there are any questions or concerns during
installation.
3-2. SET FEEDER TRAY
Attach the tray by pointing the feeder tray downward.
1)
2)
* When you laminate materials in double letter and digital
paper sizes set the extension tray on the feeder tray as
shown.
3-3. SET EXIT TRAY
Attach the exit tray firmly in the holes. Select upper or lower holes according to the thickness of the finished
product.