Cleaning the heat rollers – Drylam Fujipla ALM3222 User Manual
Page 63
AL-MEISTER ALM3222 Instruction Manual
Page 63 of 63
8. CLEANING THE HEAT ROLLERS
With continuous use the heat rollers will accumulate adhesive and dirt. It is recommended that you
periodically inspect them for adhesive build-up.
Suggested solvents are:
Rubbing alcohol (isopropyl 70%, or higher)
Goof-Off®,
Acetone
Poly-Off®
These products are available locally.
NOTE: Be sure the laminator is cool before cleaning with
alcohol.
(end)