Drylam Fujipla ALM3222 - Manual (Page 36)

AL-MEISTER ALM3222 Instruction Manual
Page 36 of 63
5. AUTOMATIC OPERATION (cont’d)
5-2-2. SET SPEED
1. On the “READY” screen press TEMP./SPEED button twice.
* The default is set at 40 ipm. This is only a
power on default and may not be proper for
some paper stocks and thicknesses of film.
2. Press UP or DOWN button to set speed.
3. The speed can be set by 4"/min increments.
4. The speed display blinks. Press TEMP./SPEED button to confirm the speed.
5. Press TEMP./SPEED button again to return to the previous display.