Set lamination film/manual mode (cont’d) – Drylam Fujipla ALM3222 User Manual

Page 21

Text mode
Original mode

AL-MEISTER ALM3222 Instruction Manual

Page 21 of 63

4. SET LAMINATION FILM/MANUAL MODE (cont’d)

3. Open the Feeder Cover and Film Cover.

NOTE: Components on the inside of the machine get very hot. Always be careful.

4. Loosen the two tension controllers, if necessary. Set the upper roll of film in the upper mandrel holders.
Align the black tape on the film roll with the black dot on the mandrel holder.