Drylam Fujipla ALM3222 - Manual (Page 33)

AL-MEISTER ALM3222 Instruction Manual
Page 33 of 63
5. AUTOMATIC OPERATION
5-1. WARM UP
CAUTION:
Automatic mode should not be performed until the machine has been set up properly in
Manual Mode. See page 17 for details.
1. Connect the power cord to the wall socket. Turn on the
power switch. The POWER lamp lights up.
2. Buzzer beeps.
These displays appear for a few seconds:
ALM3222
Ver A01.1
Software version appears.
------ FILM INFO ------
A
38mic.
320mm
LEFT : 80%
Film Info display appears. (Or, CHECK FILM error will appear if RFID tag is damaged, or not in place.)
------ WARM UP ------
TEMP = 210