Section 5-2-12, Automatic operation (cont’d), Early models (mc #166, and below) – Drylam Fujipla ALM3222 User Manual
Page 50: Later models (mc #167, and later)
AL-MEISTER ALM3222 Instruction Manual
Page 50 of 63
5. AUTOMATIC OPERATION (cont’d)
5-2-12. PAPER FEED RESIST ROLLER PRESSURE ADJUSTMENT (MECHANICAL)
EARLY MODELS (MC #166, and below):
LATER MODELS (MC #167, and later):
The Paper Feed Resist Roller Pressure Adjust knob located under the Feed Tray controls the amount of
resistance applied to the stack of paper in the feeder tray to keep more than one sheet from being
drawn from the tray and entering the lamination area.
Upwards = more resistance to multiple sheets being drawn from the tray.
Downwards = less resistance to sheets being drawn from the tray.