Drylam Fujipla ALM3222 - Manual (Page 4)

AL-MEISTER ALM3222 Instruction Manual
Page 4 of 63
SPECIFICATIONS
The ALM3222 is spec’d for 16 mil maximum paper/film thickness. This table shows maximum paper stock
thickness given the thickness and number of sheets of film used:
Model ALM3222
Minimum Maximum
Feeder Tray Capacity 1 200 pages (20# copy paper), less for thicker paper
Paper Width 8-1/8” 13”
Finished & Trimmed Width 8-9/16” 13”
Paper Length 6-1/2” 20” in normal mode, unlimited length in “LONG MODE”
Operating Temperature 170F 270F
Operating Speed (in. per min.) 20 68
Finished Size (W x L) and
Trimming Methods
Letter (8.5” x 11”); With Margin: 8.74" X 11.24"; Without Margin: 8.5" X 11".
Double Letter (11” x 17”); With Margin: 11.24" X 17.24"; Without Margin: 11" X 17"
Digital Paper (12” x 18”) With Margin: 12.24" X 18.24"; Without Margin: 12" X 18"
Processing Speed 200 sheets/hour at 8.5” long
Maximum Laminated Thickness 16mil (.016”) (including film thickness)
Exit Tray capacity
200 pages (20# copy paper laminated with 5mil film), less for thicker paper
Warm-up Time Approx. 5-7 minutes
Power Source AC 120V 60 Hz
Power Consumption 1200W, 10A
Dimensions (W x L x H)
50.0"(W) X 23.6"(D) X 43.3"(H) with Stand, Feeder Tray, Feeder Tray Extension and
Exit Tray installed.
Weight Laminator : 97 LBS; Stand : 52.9 LBS
Environmental Restrictions Within the range of 32F to 86F (68 +/- 40F recommended)/an altitude below 6600'.
Accessories
Box 1: Feeder Tray -- Extension Feeder Tray -- Exit Tray -- Power Cord
Box 2: Stand -- Assembly instructions for stand -- Screws and tool for assembling
stand-- Waste collection box.
ALM3222 Absolute Maximum Paper Thickness Table
Available
film
thicknesses
(MIL)
One-sided lamination Two-sided lamination
MAXIMUM PAPER THICKNESS: MAXIMUM PAPER THICKNESS:
MIL COVER INDEX
METRIC
(gsm)
MIL COVER INDEX
METRIC
(gsm)
1.2 14.8 120# 180# 312 N/A
1.5 14.5 114# 170# 309 13 105# 158# 286
3 13 105# 158# 286 10 90# 135# 245
5 11 100# 150# 271 6 40# 60# 162