Altera Interlaken MegaCore Function - Manual (Page 17)

Chapter 2: Getting Started 2–5
Qsys Design Flow
June 2012 Altera Corporation Interlaken MegaCore Function
User Guide
Figure 2–2 shows a block diagram of an example Qsys system.
Specifying Parameters
To specify Interlaken MegaCore function parameters using the Qsys flow, perform the
following steps:
1. Create a new Quartus II project using the New Project Wizard available from the
File menu.
2. On the Tools menu, click Qsys.
3. On the Component Library tab, expand Interface Protocols > Interlaken and
highlight Interlaken.
4. Click Add to add an Interlaken MegaCore function to your system. The Interlaken
parameter editor appears.
5. Specify the parameters in the Interlaken parameter editor. For detailed
explanations of these parameters, refer to Chapter 3, Parameter Settings .
Figure 2–2. Qsys System
Interlaken
Link Partner
System Interconnect
DMA
Controller
Interlaken
Client
Interlaken
Client
On-Chip
Memory
Qsys System
Interlaken
MegaCore Function
On-Chip
FIFO Buffer
Avalon Streaming Connection Avalon Streaming Connection
f
For Information About Refer To
System interconnect
Qsys Interconnect chapter in volume 1 of the Quartus II
Handbook and the Avalon Interface Specifications
Qsys tool
Creating a System with Qsys in volume 1 of the Quartus II
Handbook
Quartus II software Quartus II Help