Altera DQ (ALTDQ) - Manual (Page 31)

Document Revision History Page 31
November 2010 Altera Corporation DQ (ALTDQ) and DQS (ALTDQS) Megafunctions
Document Revision History
Table 20 shows the revision history for this document.
LPM_HINT String No
Allows you to specify Altera-specific parameters in VHDL Design
Files (.vhd). Default is UNUSED.
LPM_TYPE String No
Identifies library of parameterized modules (LPM) entity name in
VHDL Design Files.
INTENDED_DEVICE_
FAMILY
String No
This parameter is used for modeling and behavioral simulation
purposes. Create the ALTDQS megafunction with the MegaWizard
Plug-in Manager to calculate the value for this parameter.
Notes to Table 19 :
(1) Available for Stratix II devices only.
(2) Available for Stratix II and Cyclone II devices only.
(3) Available for Cyclone II devices only.
Table 19. ALTDQS Megafunction Parameters (Part 4 of 4)
Parameter Type Required Description
Table 20. Document Revision History
Date Version Changes
November 2010 3.2
■ Added output ports for the ALTDQ megafunction
■ Added prototype and component declarations
November 2009 3.1
Updated for Quartus II v9.1:
■ Updated “Device Family Support” on page 1.
■ Removed “Resource Utilization and Performance” section.
■ Removed MegaWizard Plug-In Manager figures.
■ Added “MegaWizard Plug-In Manager Page Option and Description for ALTDQS
Megafunction” on page 3, “MegaWizard Plug-In Manager Page Option and Description
ALTDQ Megafunction” on page 13.
August 2009 3.0 Maintainence release.
July 2008 2.1 ■ Updated template; no other changes
August 2006 2.0
■ Updated screen shots
■ Added ModelSim-Altera simulation procedure
■ Minor text edits for the Quartus ® II software version 6.0 release
April 2005 1.1 Minor corrections to tables 2-2 and 2-8.
March 2005 1.0 Initial release.