Pilz PNOZ mmc1p ETH - Manual (Page 42)

4.3 Device configuration
4 Application example
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-6
Base unit PNOZ mm0.1p
1. Base unit PNOZ mm0.1p
2. Configure communication module PNOZ mmc1p ETH
3. Insert inputs/outputs that are downloaded via the integrated interface
4.3.2 PSSu system in the automation system PSS 4000
PSSu system in the automation system PSS 4000 4- ModbusTCP_Bsp_Konfiguration-PSS 4000
The configuration is made in PAS4000.
Create IP connection
Create the IP connection in the IP Connections Editor
1. Enter remote IP address
>
Enter the IP addresses of the PNOZmulti Ethernet connections.
2. Enter remote port number
> Enter the port number "502".
The number may not be modified.
3. Select function code
>
From the list, select "WriteMultipleCols0x"
4. Define the start address and the length of the data block
> Enter the start address and the data length in the "Send" field