3modbus/tcp - data areas, 4 assignment of data areas – Pilz PNOZ mmc1p ETH User Manual
Page 21
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-11
3.4
Assignment of data areas
3
Modbus/TCP - Data areas
Register 854 to 866"Expansion module, left"
Please note: for analogue input modules, the content for "High Byte"
and "Low Byte" is transposed.
3.4.7
State of the outputs from the base unit and expansion modules
State of the outputs from the base unit and expansion modules
3-
ModbusTCP_Datenbereiche-Status Ausgänge Basisgerät u Module-PNOZmulti
The table below describes the Modbus/TCP data areas that contain the
state of the outputs from the base unit and expansion modules.
Relevant areas for the data are defined in the Modbus/TCP data areas
Discrete Inputs (1x) and Input Register (3x). Read access is available to
these data areas.
867
13887... 13872
Reserved
868
13903... 13888
0
0
0
Register
(3x)
Coil/
Discrete Input
(1x)
Content
High Byte
Low Byte
869
13919... 13904
0 / Base unit o0 - 03
4 Bit re-
served..o3…o0
0
870
13935... 13920
Base unit o4 - o5 / expansion
module, right
Right 1 o7…o0
6 Bit reserved
o5,o4
871
13951... 13936
Expansion module
Right 3 o7…o0
Right 2 o7…o0
872
13967... 13952
Expansion module, right
Right 5 o7…o0
Right 4 o7…o0
873
13983... 13968
Expansion module, right
Right 7 o7…o0
Right 6 o7…o0
874
13999... 13984
Expansion module, right
/ res
Reserved
Right 8 o7…o0
875
14015... 14000
0
0
0
876
14031... 14016
0
0
0
877
14047... 14032
0 / Expansion module, right
Right 1 o15…o8
0
878
14063... 14048
Expansion module, right
Right 3 o15…o8
Right 2 o15…o8
879
14079... 14064
Expansion module, right
Right 5 o15…o8
Right 4 o15…o8
880
14095... 14080
Expansion module, right
Right 7 o15…o8
Right 6 o15…o8
881
14111... 14096
Expansion module, right / res
Reserved
Right 8 o15…o8
Register
(3x)
Coil/
Discrete Input
(1x)
Content
High Byte
Low Byte