Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 74)

4 • Reference
4-16 SV61656 Rev. A
Envelope Feeder
Minimum Envelope Size: 3.5 in. (88mm) depth
8.5 in. (220mm) width
Maximum Envelope Size: 6.5 in. (164mm) depth
9.5 in. (242mm) width
Envelope Weights: 17 lbs. (65g/m 2 ) minimum
26 lbs. (100g/m 2 ) maximum
Envelope Tray Capacity: Up to a maximum of 100 24 lb. (90g/m 2 )
envelopes.
End Clearance: End clearance between insert and enve-
lope is a minimum of 0.236 in. (6mm) at
each side, that is, a minimum of 0.472 in
(12mm) overall. Take this measurement
with all documents placed in the enve-
lope.
Depth Clearance: The insert must allow a minimum clear-
ance of 0.118 in. (3mm) for unfolded
documents, and 0.236 in. (6mm) for
folded documents, below the flap crease
after it is fully inserted into the envelope.
Envelope Flap and Throat Requirements:
See illustration below:
19mm
Min 1.6mm
Max 6mm
throat depth
at 19mm in from
edge of envelope
Min 6mm
Max 41mm
Closed flap tip should not
come closer than
44mm to bottom
of envelope
Min 25.5mm
Max 63mm
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT
NOTIFICATION AND ARE SUBJECT TO TEST
DEPTH
WIDTH
(0.25 in.)
(1.6 in.)
(0.063 in.)
(0.25 in.)
19mm (0.75 in.)
in from edge of
envelope
44mm (1.73 in.) to bottom
(0.75 in.)
Min 25.5mm
(1 in.)
Max 63mm
(2.5 in.)