Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 32)

2 • Operation
2-16 SV61656 Rev. A
Sealer
This setting only appears if an insertion mode has been selected.
Select whether you want to seal envelopes or not.
Press
Change (+/-) to switch the option on or off:
On
Turns the sealer unit on for automatic sealing of envelopes.
Make sure the sealer water bottle is full of E-Z Seal® or wa-
ter (see page 2-10).
Off
Turns the sealer unit off. Envelopes will be ejected unsealed.
When the sealer is set as required, press Next (►) to advance to the
next setting…
If you have selected either of the sheet feeders, the next setting of-
fered will be paper length. However, if you are using the insert feeder
only, folding is not possible and the display will advance directly to
the envelopedepth setting explained on page 2-18.