Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 53)

OMR • 3
3-15 SV61656 Rev.A
Setting Select/Supplementary Feeders
Press Change (+/-) until you see
the option you want:
If sheet feeder 1 is the main/
scanning feeder, you can pro-
gram sheet feeder 2 and/or the
insert feeder for normal (one per
envelope) feeding or select feeding.
If sheet feeder 2 is the main/scanning feeder, you can program sheet
feeder 1 and/or the insert feeder for normal (one per envelope) feed-
ing or select feeding.
Select feed allows the machine to feed one piece selectvely from
either feeder per envelope.
On Double Detect
Feeder on with the double detector operating, without select
feed. (The double detector stops the machine if two or more
sheets feed simultaneously from the feeder.)
On SF Double Detect
Select feeder on with the double detector operating. (The
double detector stops the machine if two or more sheets
feed simultaneously from the feeder.)
On SF
Select feeder on without the double detector.
Off
Feeder turned off for this job.
On
Feeder on without the double detector or select feed.
When the feeder is set as required, press Next (►) to go to the
sealer setting. Job programming then follows the normal sequence
described from page 2-16 of this guide.