Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 20)

2 • Operation
2-4 SV61656 Rev. A
Setting the Sheet Feeders
1. Adjust the side guides to the
width of the material you’re
running, then back-off a
quarter turn on the side guide
control. This sets the cor-
rect clearance between the
guides and the material.
2. Take the stack of paper and
aerate it to ensure that indi-
vidual sheets are not stuck
together.
3. Jog the stack back into align-
ment. The sheet feeders ac-
cept the paper stack aligned
in a manner similar to that
of a photocopier paper cas-
sette.
4. The display shows the correct orientation of the paper.
FACE UP
HEAD FIRST
ABC
FACE DOWN
FEET FIRST
ABC