Reference • 4 – Pitney Bowes DI425 FastPac Inserting Systems User Manual
Page 73
Reference • 4
4-15
SV61656 Rev. A
Insert Feeder
Minimum Insert Size: 5 in. (127mm) width
3.25 in. (82mm) length
Maximum Insert Size: 9 in. (230mm) width
6 in. (152mm) length
Paper Weights:
20 lbs. (75g/m
2
) min. (non-folded cut sheet)
50 lbs. (180g/m
2
) max. (single sheet)
16 lbs. (60g/m
2
) min. (folded material)
And inserts of up to a maximum com-
pressed thickness of 0.078 in. (2mm)
Pre-folded or single panel Inserts should be fed from the Insert
Feeder.
Double Document Detector Material Range:
16 lbs. (60g/m
2
) minimum
32 lbs. (120g/m
2
) maximum
Feed Tray Capacity: Up to a maximum of 100 Inserts
Sealer
The machine can seal up to a maximum of 1200 envelopes between
refills.
Stacker
The envelope stacker can accommodate up to 150 filled envelopes
(depending on size and contents of the envelope).
Material Requirements
For best performance, use only materials approved by Pitney Bowes.
Materials should be good quality and properly stored.
Recommended storage conditions:
18°C (65°F) to 25°C (77°F)
40% to 60% relative
humidity