Reference • 4, Material specifications – Pitney Bowes DI425 FastPac Inserting Systems User Manual
Page 71
Reference • 4
4-13
SV61656 Rev. A
Material Specifications
Sheet Feeders
Minimum Sheet Size: 5 in. (127mm) width
5 in. (127mm) length
Maximum Sheet Size: 9 in. (229mm) width
16 in. (406mm) length
Paper Weights:
16 lb. (60g/m
2
) minimum (non OMR)
18 lb. (70g/m
2
) minimum (OMR)
32 lb. (120g/m
2
) maximum
Fold Configurations: Material length limits before folding
Single fold:
5 in. (127mm) - 12 in. (315mm)
C (letter fold):
6 in. (150mm) - 14 in. (356mm)
Z (accordion fold):
8 in. (201mm) - 14 in. (356mm)
Double fold:
12 in. (305mm) - 16 in. (406mm)
Double Document Detector Material range: 60g/m
2
(16 lb) Min
120g/m
2
(32 lb) Max
Feed Tray Capacity: Up to a maximum of 325 sheets of 20 lb.
bond (80g/m
2
)
Manual Feed Mode: In manual feed mode, the machine will pro-
cess stapled sets of up to five sheets of 20
lb. bond (80g/m
2
) to a maximum total weight
of 100 lbs. (400g/m
2
) per set.
Note: For manual feed applications, you
may use only sheet feeder number 1, plus
the insert feeder if required.
The maximum compressed thickness after
folding must not exceed 0.078 inch (2mm).
We do not recommend the use of glossy/
coated sheets.