Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 65)

Reference • 4
4-7 SV61656 Rev. A
Problem Remedy Page
SHEETS
Poor Sheet Feed
Feeder not select-
ed to feed.
Check job setup. 2-13
Sheet feeder side
guides set incor-
rectly.
Set guides to sheet width and back
off 1/4 turn.
2-4
Sheets loaded in-
correctly.
Make sure to fan stack before load-
ing.
2-4
Multiple Sheets Feed when One Is Expected
Manual feed mode
is selected.
Check job setup and manual feed
lever position.
2-2
Sheets loaded in-
correctly.
Make sure to fan stack before load-
ing.
2-4
Address in Wrong Position in Envelope Window
Address-bearing
sheets incorrectly
loaded.
Load sheets so that the address
appears through the envelope win-
dow.
2-4
Folds incorrectly
set.
Check job setup. 2-17
2-18
Poor Folding
A fold almost cor-
responds with a
perforation on the
sheet, causing a
box or third fold.
Adjust the fold sizes slightly to
avoid this situation.
2-17
2-18