Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 36)

2 • Operation
2-20 SV61656 Rev. A
Confirming the Job Setup
Job setup is now complete. The
display will show the complete job
setup for you to confirm.
If you see a setting that’s incorrect, use the Prev (◄) button to back-
track to the setting and correct it.
When you’re satisfied with the job setup, press the
Setup button.
The machine will save the job in its memory and reset to the new job.
When this is complete, the display
will show the new job with the
message “Trial Piece Required”.
Job settings are retained by the
machine even wth power dsconnected until you change or delete
them as described on page 2-22.