Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 66)

4 • Reference
4-8 SV61656 Rev. A
Problem Remedy Page
INSERTS
Poor Insert Feed
Feeder not select-
ed to feed.
Check job setup. 2-3,
2-20
Insert feeder side
guides set incor-
rectly.
Set guides to insert width and back
off 1/4 turn.
2-6
Insert feeder sepa-
rator adjustments
incorrect.
Make sure the two insert feeder
adjustments (lever and separator
shield) are set correctly for the type
of insert you’re running.
2-7
Inserts loaded in-
correctly.
Make sure to fan stack before load-
ing. Changing the orientation of the
insert stack may help.
2-7
Insert feeder
wedge used incor-
rectly.
Let the wedge slide down behind
the insert stack to support it.
2-7
Inserts out of spec-
ification.
Check the material specifications in
this guide.
4-15