Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 29)

Operation • 2
2-13 SV61656 Rev. A
Setting the First/Main Sheet Feeder
The machine automatically selects the first feeder to set, depending
on the fold type selected.
Note: If you’re collating different sheets using both sheet feeders,
you must load the prime (addressed) document into sheet
feeder 1 for C and Double folds, and into sheet feeder 2
for Z- or single folds. If you’re using a single sheet only, you
may use either sheet feeder or you can use both by choos
ing the linked feeder option described below.
Press Change (+/-) until you see
the option you want:
On Double Detect
Feeder on with the
double detector operat-
ing. (The double detector stops the machine if two or more
sheets feed simultaneously from the feeder).
Off
Feeder turned off for this job.
On
Feeder on without the double detector.
Manual Feed
Allows you to manually feed collated sets (only available on
sheet feeder 1; also see notes on following page).
Linked: On
Linked: On Double Detect
These functions are available only on the three-station ma-
chine. Feed will initially be from the first sheet feeder. When
the feeder is empty, the machine automatically switches to
feeding from the second sheet feeder.
Load both feeders before running a trial piece. This is neces-
sary because each feeder will feed a trial piece.
contnued...