Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 54)

3 • OMR
3-16 SV61656 Rev. A
Adjustment of OMR Scanner
In order for OMR scanning to work correctly, it is important to ensure
that the scanning heads are positioned in line with the scan dash
(OMR) marks printed on the material.
To locate the scanning head for the top sheet feeder 1, open the top
cover. You’ll find the scanning head at the rear of the machine.
To locate the scanning head for the bottom sheet feeder 2, remove
both sheet feeder 2 and the fold plate situated below sheet feeder 2.
You’ll find the scanning head mounted at the front of the machine.
Bottom Sheet
Feeder Scanner
Top Sheet
Feeder Scanner